OioDatagramChannelConfig (Netty 4.1.109.Final API文档

所有超级接口:

ChannelConfig, DatagramChannelConfig

已过时。
use NIO / EPOLL / KQUEUE transport.
```
@Deprecated
public interface OioDatagramChannelConfig
extends DatagramChannelConfig
```

方法概要

All Methods Instance Methods Abstract Methods Deprecated Methods
限定符和类型	方法和说明
`int`	`getSoTimeout()` 已过时。 Returns the maximal time a operation on the underlying socket may block.
`OioDatagramChannelConfig`	`setAllocator(ByteBufAllocator allocator)` 已过时。 Set the `ByteBufAllocator` which is used for the channel to allocate buffers.
`OioDatagramChannelConfig`	`setAutoClose(boolean autoClose)` 已过时。 Sets whether the `Channel` should be closed automatically and immediately on write failure.
`OioDatagramChannelConfig`	`setAutoRead(boolean autoRead)` 已过时。 Sets if `ChannelHandlerContext.read()` will be invoked automatically so that a user application doesn't need to call it at all.
`OioDatagramChannelConfig`	`setBroadcast(boolean broadcast)` 已过时。 Sets the `StandardSocketOptions.SO_BROADCAST` option.
`OioDatagramChannelConfig`	`setConnectTimeoutMillis(int connectTimeoutMillis)` 已过时。 Sets the connect timeout of the channel in milliseconds.
`OioDatagramChannelConfig`	`setInterface(java.net.InetAddress interfaceAddress)` 已过时。 Sets the address of the network interface used for multicast packets.
`OioDatagramChannelConfig`	`setLoopbackModeDisabled(boolean loopbackModeDisabled)` 已过时。 Sets the `StandardSocketOptions.IP_MULTICAST_LOOP` option.
`OioDatagramChannelConfig`	`setMaxMessagesPerRead(int maxMessagesPerRead)` 已过时。
`OioDatagramChannelConfig`	`setMessageSizeEstimator(MessageSizeEstimator estimator)` 已过时。 Set the `MessageSizeEstimator` which is used for the channel to detect the size of a message.
`OioDatagramChannelConfig`	`setNetworkInterface(java.net.NetworkInterface networkInterface)` 已过时。 Sets the `StandardSocketOptions.IP_MULTICAST_IF` option.
`OioDatagramChannelConfig`	`setReceiveBufferSize(int receiveBufferSize)` 已过时。 Sets the `StandardSocketOptions.SO_RCVBUF` option.
`OioDatagramChannelConfig`	`setRecvByteBufAllocator(RecvByteBufAllocator allocator)` 已过时。 Set the `RecvByteBufAllocator` which is used for the channel to allocate receive buffers.
`OioDatagramChannelConfig`	`setReuseAddress(boolean reuseAddress)` 已过时。 Gets the `StandardSocketOptions.SO_REUSEADDR` option.
`OioDatagramChannelConfig`	`setSendBufferSize(int sendBufferSize)` 已过时。 Sets the `StandardSocketOptions.SO_SNDBUF` option.
`OioDatagramChannelConfig`	`setSoTimeout(int timeout)` 已过时。 Sets the maximal time a operation on the underlying socket may block.
`OioDatagramChannelConfig`	`setTimeToLive(int ttl)` 已过时。 Sets the `StandardSocketOptions.IP_MULTICAST_TTL` option.
`OioDatagramChannelConfig`	`setTrafficClass(int trafficClass)` 已过时。 Sets the `StandardSocketOptions.IP_TOS` option.
`OioDatagramChannelConfig`	`setWriteBufferHighWaterMark(int writeBufferHighWaterMark)` 已过时。 Sets the high water mark of the write buffer.
`OioDatagramChannelConfig`	`setWriteBufferLowWaterMark(int writeBufferLowWaterMark)` 已过时。 Sets the low water mark of the write buffer.
`OioDatagramChannelConfig`	`setWriteBufferWaterMark(WriteBufferWaterMark writeBufferWaterMark)` 已过时。 Set the `WriteBufferWaterMark` which is used for setting the high and low water mark of the write buffer.
`OioDatagramChannelConfig`	`setWriteSpinCount(int writeSpinCount)` 已过时。 Sets the maximum loop count for a write operation until `WritableByteChannel.write(ByteBuffer)` returns a non-zero value.

从接口继承的方法 io.netty.channel.socket.DatagramChannelConfig
getInterface, getNetworkInterface, getReceiveBufferSize, getSendBufferSize, getTimeToLive, getTrafficClass, isBroadcast, isLoopbackModeDisabled, isReuseAddress

从接口继承的方法 io.netty.channel.ChannelConfig
getAllocator, getConnectTimeoutMillis, getMaxMessagesPerRead, getMessageSizeEstimator, getOption, getOptions, getRecvByteBufAllocator, getWriteBufferHighWaterMark, getWriteBufferLowWaterMark, getWriteBufferWaterMark, getWriteSpinCount, isAutoClose, isAutoRead, setOption, setOptions

- 方法详细资料
  - setSoTimeout
```
OioDatagramChannelConfig setSoTimeout(int timeout)
```
    已过时。
    
    Sets the maximal time a operation on the underlying socket may block.
  - getSoTimeout
```
int getSoTimeout()
```
    已过时。
    
    Returns the maximal time a operation on the underlying socket may block.
  - setSendBufferSize
```
OioDatagramChannelConfig setSendBufferSize(int sendBufferSize)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.SO_SNDBUF option.
    
    指定者:
    
    setSendBufferSize 在接口中 DatagramChannelConfig
  - setReceiveBufferSize
```
OioDatagramChannelConfig setReceiveBufferSize(int receiveBufferSize)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.SO_RCVBUF option.
    
    指定者:
    
    setReceiveBufferSize 在接口中 DatagramChannelConfig
  - setTrafficClass
```
OioDatagramChannelConfig setTrafficClass(int trafficClass)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.IP_TOS option.
    
    指定者:
    
    setTrafficClass 在接口中 DatagramChannelConfig
  - setReuseAddress
```
OioDatagramChannelConfig setReuseAddress(boolean reuseAddress)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Gets the StandardSocketOptions.SO_REUSEADDR option.
    
    指定者:
    
    setReuseAddress 在接口中 DatagramChannelConfig
  - setBroadcast
```
OioDatagramChannelConfig setBroadcast(boolean broadcast)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.SO_BROADCAST option.
    
    指定者:
    
    setBroadcast 在接口中 DatagramChannelConfig
  - setLoopbackModeDisabled
```
OioDatagramChannelConfig setLoopbackModeDisabled(boolean loopbackModeDisabled)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.IP_MULTICAST_LOOP option.
    
    指定者:
    
    setLoopbackModeDisabled 在接口中 DatagramChannelConfig
    
    参数:
    
    loopbackModeDisabled - true if and only if the loopback mode has been disabled
  - setTimeToLive
```
OioDatagramChannelConfig setTimeToLive(int ttl)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.IP_MULTICAST_TTL option.
    
    指定者:
    
    setTimeToLive 在接口中 DatagramChannelConfig
  - setInterface
```
OioDatagramChannelConfig setInterface(java.net.InetAddress interfaceAddress)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the address of the network interface used for multicast packets.
    
    指定者:
    
    setInterface 在接口中 DatagramChannelConfig
  - setNetworkInterface
```
OioDatagramChannelConfig setNetworkInterface(java.net.NetworkInterface networkInterface)
```
    已过时。
    
    从接口复制的说明: DatagramChannelConfig
    
    Sets the StandardSocketOptions.IP_MULTICAST_IF option.
    
    指定者:
    
    setNetworkInterface 在接口中 DatagramChannelConfig
  - setMaxMessagesPerRead
```
OioDatagramChannelConfig setMaxMessagesPerRead(int maxMessagesPerRead)
```
    已过时。
    
    指定者:
    
    setMaxMessagesPerRead 在接口中 ChannelConfig
    
    指定者:
    
    setMaxMessagesPerRead 在接口中 DatagramChannelConfig
  - setWriteSpinCount
```
OioDatagramChannelConfig setWriteSpinCount(int writeSpinCount)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Sets the maximum loop count for a write operation until WritableByteChannel.write(ByteBuffer) returns a non-zero value. It is similar to what a spin lock is used for in concurrency programming. It improves memory utilization and write throughput depending on the platform that JVM runs on. The default value is 16.
    
    指定者:
    
    setWriteSpinCount 在接口中 ChannelConfig
    
    指定者:
    
    setWriteSpinCount 在接口中 DatagramChannelConfig
  - setConnectTimeoutMillis
```
OioDatagramChannelConfig setConnectTimeoutMillis(int connectTimeoutMillis)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Sets the connect timeout of the channel in milliseconds. If the Channel does not support connect operation, this property is not used at all, and therefore will be ignored.
    
    指定者:
    
    setConnectTimeoutMillis 在接口中 ChannelConfig
    
    指定者:
    
    setConnectTimeoutMillis 在接口中 DatagramChannelConfig
    
    参数:
    
    connectTimeoutMillis - the connect timeout in milliseconds. 0 to disable.
  - setAllocator
```
OioDatagramChannelConfig setAllocator(ByteBufAllocator allocator)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Set the ByteBufAllocator which is used for the channel to allocate buffers.
    
    指定者:
    
    setAllocator 在接口中 ChannelConfig
    
    指定者:
    
    setAllocator 在接口中 DatagramChannelConfig
  - setRecvByteBufAllocator
```
OioDatagramChannelConfig setRecvByteBufAllocator(RecvByteBufAllocator allocator)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Set the RecvByteBufAllocator which is used for the channel to allocate receive buffers.
    
    指定者:
    
    setRecvByteBufAllocator 在接口中 ChannelConfig
    
    指定者:
    
    setRecvByteBufAllocator 在接口中 DatagramChannelConfig
  - setAutoRead
```
OioDatagramChannelConfig setAutoRead(boolean autoRead)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Sets if ChannelHandlerContext.read() will be invoked automatically so that a user application doesn't need to call it at all. The default value is true.
    
    指定者:
    
    setAutoRead 在接口中 ChannelConfig
    
    指定者:
    
    setAutoRead 在接口中 DatagramChannelConfig
  - setAutoClose
```
OioDatagramChannelConfig setAutoClose(boolean autoClose)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Sets whether the Channel should be closed automatically and immediately on write failure. The default is true.
    
    指定者:
    
    setAutoClose 在接口中 ChannelConfig
    
    指定者:
    
    setAutoClose 在接口中 DatagramChannelConfig
  - setMessageSizeEstimator
```
OioDatagramChannelConfig setMessageSizeEstimator(MessageSizeEstimator estimator)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Set the MessageSizeEstimator which is used for the channel to detect the size of a message.
    
    指定者:
    
    setMessageSizeEstimator 在接口中 ChannelConfig
    
    指定者:
    
    setMessageSizeEstimator 在接口中 DatagramChannelConfig
  - setWriteBufferWaterMark
```
OioDatagramChannelConfig setWriteBufferWaterMark(WriteBufferWaterMark writeBufferWaterMark)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Set the WriteBufferWaterMark which is used for setting the high and low water mark of the write buffer.
    
    指定者:
    
    setWriteBufferWaterMark 在接口中 ChannelConfig
    
    指定者:
    
    setWriteBufferWaterMark 在接口中 DatagramChannelConfig
  - setWriteBufferHighWaterMark
```
OioDatagramChannelConfig setWriteBufferHighWaterMark(int writeBufferHighWaterMark)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Sets the high water mark of the write buffer. If the number of bytes queued in the write buffer exceeds this value, Channel.isWritable() will start to return false.
    
    指定者:
    
    setWriteBufferHighWaterMark 在接口中 ChannelConfig
  - setWriteBufferLowWaterMark
```
OioDatagramChannelConfig setWriteBufferLowWaterMark(int writeBufferLowWaterMark)
```
    已过时。
    
    从接口复制的说明: ChannelConfig
    
    Sets the low water mark of the write buffer. Once the number of bytes queued in the write buffer exceeded the high water mark and then dropped down below this value, Channel.isWritable() will start to return true again.
    
    指定者:
    
    setWriteBufferLowWaterMark 在接口中 ChannelConfig

接口 OioDatagramChannelConfig

方法概要

从接口继承的方法 io.netty.channel.socket.DatagramChannelConfig

从接口继承的方法 io.netty.channel.ChannelConfig

方法详细资料

setSoTimeout

getSoTimeout

setSendBufferSize

setReceiveBufferSize

setTrafficClass

setReuseAddress

setBroadcast

setLoopbackModeDisabled

setTimeToLive

setInterface

setNetworkInterface

setMaxMessagesPerRead

setWriteSpinCount

setConnectTimeoutMillis

setAllocator

setRecvByteBufAllocator

setAutoRead

setAutoClose

setMessageSizeEstimator

setWriteBufferWaterMark

setWriteBufferHighWaterMark

setWriteBufferLowWaterMark