io.netty.channel.sctp

接口 SctpServerChannelConfig

所有超级接口:

ChannelConfig

所有已知实现类:

DefaultSctpServerChannelConfig

public interface SctpServerChannelConfig
extends ChannelConfig

A ChannelConfig for a SctpServerChannelConfig.

Available options

In addition to the options provided by ChannelConfig, SctpServerChannelConfig allows the following options in the option map:

Name	Associated setter method
ChannelOption.SO_BACKLOG	setBacklog(int)
ChannelOption.SO_RCVBUF	setReceiveBufferSize(int)
ChannelOption.SO_SNDBUF	setSendBufferSize(int)
SctpChannelOption.SCTP_INIT_MAXSTREAMS	#setInitMaxStreams(InitMaxStreams)

方法概要

限定符和类型	方法和说明
int	getBacklog() Gets the backlog value to specify when the channel binds to a local address.
SctpStandardSocketOptions.InitMaxStreams	getInitMaxStreams() Gets the SCTP_INIT_MAXSTREAMS option.
int	getReceiveBufferSize() Gets the SO_RCVBUF option.
int	getSendBufferSize() Gets the SO_SNDBUF option.
SctpServerChannelConfig	setAllocator(ByteBufAllocator allocator) Set the ByteBufAllocator which is used for the channel to allocate buffers.
SctpServerChannelConfig	setAutoClose(boolean autoClose) Sets whether the Channel should be closed automatically and immediately on write failure.
SctpServerChannelConfig	setAutoRead(boolean autoRead) Sets if ChannelHandlerContext.read() will be invoked automatically so that a user application doesn't need to call it at all.
SctpServerChannelConfig	setBacklog(int backlog) Sets the backlog value to specify when the channel binds to a local address.
SctpServerChannelConfig	setConnectTimeoutMillis(int connectTimeoutMillis) Sets the connect timeout of the channel in milliseconds.
SctpServerChannelConfig	setInitMaxStreams(SctpStandardSocketOptions.InitMaxStreams initMaxStreams) Gets the SCTP_INIT_MAXSTREAMS option.
SctpServerChannelConfig	setMaxMessagesPerRead(int maxMessagesPerRead) 已过时。
SctpServerChannelConfig	setMessageSizeEstimator(MessageSizeEstimator estimator) Set the MessageSizeEstimator which is used for the channel to detect the size of a message.
SctpServerChannelConfig	setReceiveBufferSize(int receiveBufferSize) Gets the SO_RCVBUF option.
SctpServerChannelConfig	setRecvByteBufAllocator(RecvByteBufAllocator allocator) Set the RecvByteBufAllocator which is used for the channel to allocate receive buffers.
SctpServerChannelConfig	setSendBufferSize(int sendBufferSize) Sets the SO_SNDBUF option.
SctpServerChannelConfig	setWriteBufferHighWaterMark(int writeBufferHighWaterMark) Sets the high water mark of the write buffer.
SctpServerChannelConfig	setWriteBufferLowWaterMark(int writeBufferLowWaterMark) Sets the low water mark of the write buffer.
SctpServerChannelConfig	setWriteBufferWaterMark(WriteBufferWaterMark writeBufferWaterMark) Set the WriteBufferWaterMark which is used for setting the high and low water mark of the write buffer.
SctpServerChannelConfig	setWriteSpinCount(int writeSpinCount) Sets the maximum loop count for a write operation until WritableByteChannel.write(ByteBuffer) returns a non-zero value.

从接口继承的方法 io.netty.channel.ChannelConfig

getAllocator, getConnectTimeoutMillis, getMaxMessagesPerRead, getMessageSizeEstimator, getOption, getOptions, getRecvByteBufAllocator, getWriteBufferHighWaterMark, getWriteBufferLowWaterMark, getWriteBufferWaterMark, getWriteSpinCount, isAutoClose, isAutoRead, setOption, setOptions

方法详细资料

getBacklog

int getBacklog()

Gets the backlog value to specify when the channel binds to a local address.

setBacklog

SctpServerChannelConfig setBacklog(int backlog)

Sets the backlog value to specify when the channel binds to a local address.

getSendBufferSize

int getSendBufferSize()

Gets the SO_SNDBUF option.

setSendBufferSize

SctpServerChannelConfig setSendBufferSize(int sendBufferSize)

Sets the SO_SNDBUF option.

getReceiveBufferSize

int getReceiveBufferSize()

Gets the SO_RCVBUF option.

setReceiveBufferSize

SctpServerChannelConfig setReceiveBufferSize(int receiveBufferSize)

Gets the SO_RCVBUF option.

getInitMaxStreams

SctpStandardSocketOptions.InitMaxStreams getInitMaxStreams()

Gets the SCTP_INIT_MAXSTREAMS option.

setInitMaxStreams

SctpServerChannelConfig setInitMaxStreams(SctpStandardSocketOptions.InitMaxStreams initMaxStreams)

Gets the SCTP_INIT_MAXSTREAMS option.

setMaxMessagesPerRead

@Deprecated
SctpServerChannelConfig setMaxMessagesPerRead(int maxMessagesPerRead)

已过时。

指定者:

setMaxMessagesPerRead 在接口中 ChannelConfig

setWriteSpinCount

SctpServerChannelConfig setWriteSpinCount(int writeSpinCount)

从接口复制的说明: ChannelConfig

Sets the maximum loop count for a write operation until WritableByteChannel.write(ByteBuffer) returns a non-zero value. It is similar to what a spin lock is used for in concurrency programming. It improves memory utilization and write throughput depending on the platform that JVM runs on. The default value is 16.

指定者:

setWriteSpinCount 在接口中 ChannelConfig

setConnectTimeoutMillis

SctpServerChannelConfig setConnectTimeoutMillis(int connectTimeoutMillis)

从接口复制的说明: ChannelConfig

Sets the connect timeout of the channel in milliseconds. If the Channel does not support connect operation, this property is not used at all, and therefore will be ignored.

指定者:

setConnectTimeoutMillis 在接口中 ChannelConfig

参数:

connectTimeoutMillis - the connect timeout in milliseconds. 0 to disable.

setAllocator

SctpServerChannelConfig setAllocator(ByteBufAllocator allocator)

从接口复制的说明: ChannelConfig

Set the ByteBufAllocator which is used for the channel to allocate buffers.

指定者:

setAllocator 在接口中 ChannelConfig

setRecvByteBufAllocator

SctpServerChannelConfig setRecvByteBufAllocator(RecvByteBufAllocator allocator)

从接口复制的说明: ChannelConfig

Set the RecvByteBufAllocator which is used for the channel to allocate receive buffers.

指定者:

setRecvByteBufAllocator 在接口中 ChannelConfig

setAutoRead

SctpServerChannelConfig setAutoRead(boolean autoRead)

从接口复制的说明: ChannelConfig

Sets if ChannelHandlerContext.read() will be invoked automatically so that a user application doesn't need to call it at all. The default value is true.

指定者:

setAutoRead 在接口中 ChannelConfig

setAutoClose

SctpServerChannelConfig setAutoClose(boolean autoClose)

从接口复制的说明: ChannelConfig

Sets whether the Channel should be closed automatically and immediately on write failure. The default is true.

指定者:

setAutoClose 在接口中 ChannelConfig

setWriteBufferHighWaterMark

SctpServerChannelConfig setWriteBufferHighWaterMark(int writeBufferHighWaterMark)

从接口复制的说明: ChannelConfig

Sets the high water mark of the write buffer. If the number of bytes queued in the write buffer exceeds this value, Channel.isWritable() will start to return false.

指定者:

setWriteBufferHighWaterMark 在接口中 ChannelConfig

setWriteBufferLowWaterMark

SctpServerChannelConfig setWriteBufferLowWaterMark(int writeBufferLowWaterMark)

从接口复制的说明: ChannelConfig

Sets the low water mark of the write buffer. Once the number of bytes queued in the write buffer exceeded the high water mark and then dropped down below this value, Channel.isWritable() will start to return true again.

指定者:

setWriteBufferLowWaterMark 在接口中 ChannelConfig

setWriteBufferWaterMark

SctpServerChannelConfig setWriteBufferWaterMark(WriteBufferWaterMark writeBufferWaterMark)

从接口复制的说明: ChannelConfig

Set the WriteBufferWaterMark which is used for setting the high and low water mark of the write buffer.

指定者:

setWriteBufferWaterMark 在接口中 ChannelConfig

setMessageSizeEstimator

SctpServerChannelConfig setMessageSizeEstimator(MessageSizeEstimator estimator)

从接口复制的说明: ChannelConfig

Set the MessageSizeEstimator which is used for the channel to detect the size of a message.

指定者:

setMessageSizeEstimator 在接口中 ChannelConfig