TotalCaptureResult

Aberration correction will not slow down capture rate relative to sensor raw output.

No aberration correction is applied.

Color correction processing operates at improved quality but reduced capture rate (relative to sensor raw output).

The camera device will adjust exposure duration to avoid banding problems with 50Hz illumination sources.

The camera device will automatically adapt its antibanding routine to the current illumination condition.

The camera device's autoexposure routine is disabled.

Like ON, except that the camera device also controls the camera's flash unit, always firing it for still captures.

Like ON_AUTO_FLASH, but with automatic red eye reduction.

The precapture metering sequence will be started by the camera device.

AE has a good set of control values, but flash needs to be fired for good quality still capture.

AE has been locked.

AE doesn't yet have a good set of control values for the current scene.

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

Extended depth of field (digital focus) mode.

The auto-focus routine does not control the lens; android.lens.focusDistance is controlled by the application.

AF believes it is focused correctly and has locked focus.

AF has failed to focus successfully and has locked focus.

AF is currently performing an AF scan initiated the camera device in a continuous autofocus mode.

Autofocus will return to its initial state, and cancel any currently active trigger.

Autofocus will trigger now.

The camera device's auto-white balance routine is disabled; the camera device uses cloudy daylight light as the assumed scene illumination for white balance.

The camera device's auto-white balance routine is disabled; the camera device uses fluorescent light as the assumed scene illumination for white balance.

The camera device's auto-white balance routine is disabled.

The camera device's auto-white balance routine is disabled; the camera device uses twilight light as the assumed scene illumination for white balance.

AWB has a good set of control values for the current scene.

AWB has been locked.

The goal of this request doesn't fall into the other categories.

This request is for a preview-like use case.

This request is for a video recording use case.

This request is for a ZSL usecase; the application will stream full-resolution images and reprocess one or several later for a final capture.

A "blackboard" effect where the image is typically displayed as regions of black, with white or grey details.

A "photo-negative" effect where the image's colors are inverted.

A "posterization" effect where the image uses discrete regions of tone rather than a continuous gradient of tones.

A "solarisation" effect (Sabattier effect) where the image is wholly or partially reversed in tone.

Use settings for each individual 3A routine.

Same as OFF mode, except that this capture will not be used by camera device background auto-exposure, auto-white balance and auto-focus algorithms (3A) to update their statistics.

Optimized for photos of quickly moving objects.

Optimized for bright, outdoor beach settings.

Indicates that no scene modes are set for a given capture request.

Optimized for nighttime photos of fireworks.

Optimized for high speed video recording (frame rate >=60fps) use case.

Optimized for low-light settings.

Optimized for dim, indoor settings with multiple moving people.

Optimized for bright, outdoor settings containing snow.

Optimized to avoid blurry photos due to small amounts of device motion (for example: due to hand shake).

Optimized for dim, indoor settings where flash must remain off.

Video stabilization is enabled.

Apply high-quality edge enhancement, at a cost of reducing output frame rate.

Do not fire the flash for this capture.

Transition flash to continuously on.

Flash fired for this capture.

Flash is ready to fire.

Hot pixel correction is applied, without reducing frame rate relative to sensor raw output.

No hot pixel correction is applied.

This camera device is running in backward compatibility mode.

The camera device faces the opposite direction as the device's screen.

The lens focus distance is measured in diopters.

The lens focus distance is not accurate, and the units used for android.lens.focusDistance do not correspond to any physical units.

Optical stabilization is enabled.

The lens parameters (android.lens.focalLength, android.lens.focusDistance, android.lens.filterDensity and android.lens.aperture) are not changing.

High-quality noise reduction is applied, at the cost of reducing frame rate relative to sensor output.

The minimal set of capabilities that every camera device (regardless of android.info.supportedHardwareLevel) supports.

The camera device post-processing stages can be manually controlled.

The camera device supports outputting RAW buffers and metadata for interpreting them.

The camera device only supports centered crop regions.

Timestamps from android.sensor.timestamp are in nanoseconds and monotonic, but can not be compared to timestamps from other subsystems (e.g.

W 3900 - 4500K

D 5700 - 7100K

Incandescent light

All pixel data is replaced with an 8-bar color pattern.

The first custom test pattern.

All pixel data is replaced by a pseudo-random sequence generated from a PN9 512-bit sequence (typically implemented in hardware with a linear feedback shift register).

Apply lens shading corrections, without slowing frame rate relative to sensor raw output

No lens shading correction is applied.

Do not include face detection statistics in capture results.

Do not include a lens shading map in the capture result.

The camera device detects illumination flickering at 50Hz in the current scene.

The camera device does not detect any flickering illumination in the current scene.

Each new frame has some subset (potentially the entire set) of the past requests applied to the camera settings.

Advanced gamma mapping and color enhancement may be applied, without reducing frame rate compared to raw sensor output.

Whether black-level compensation is locked to its current values, or is free to vary.

Gains applying to Bayer raw color channels for white-balance.

A color transform matrix to use to transform from sensor RGB color space to output linear sRGB color space.

Adjustment to auto-exposure (AE) target image brightness.

The desired mode for the camera device's auto-exposure routine.

List of metering areas to use for auto-exposure adjustment.

Range over which the auto-exposure routine can adjust the capture frame rate to maintain good exposure.

List of metering areas to use for auto-focus.

Whether the camera device will trigger autofocus for this request.

Whether auto-white balance (AWB) is currently setting the color transform fields, and what its illumination target is.

Current state of auto-white balance (AWB) algorithm.

A special color effect to apply.

Control for which scene mode is currently active.

Operation mode for edge enhancement.

Current state of the flash unit.

A location object to use when generating image GPS metadata.

Compression quality of the final JPEG image.

Resolution of embedded JPEG thumbnail.

The desired setting for the lens neutral density filter(s).

Desired distance to plane of sharpest focus, measured from frontmost surface of the lens.

Sets whether the camera device uses optical image stabilization (OIS) when capturing images.

Mode of operation for the noise reduction algorithm.

The desired region of the sensor to read out for this capture.

Duration from start of frame exposure to start of next frame exposure.

The estimated camera neutral color in the native sensor colorspace at the time of capture.

Duration between the start of first row exposure and the start of last row exposure.

A pixel [R, G_even, G_odd, B] that supplies the test pattern when android.sensor.testPatternMode is SOLID_COLOR.

Time at start of exposure of first row of the image sensor active array, in nanoseconds.

List of the faces detected through camera face detection in this capture.

List of (x, y) coordinates of hot/defective pixels on the sensor.

The shading map is a low-resolution floating-point map that lists the coefficients used to correct for vignetting, for each Bayer color channel.

The camera device estimated scene illumination lighting frequency.

High-level global contrast/gamma/tonemapping control.